Skip to main content

Lessons

Programming Exercise:Voyager Temperature Probe Controlled Scratch Teapot

Profile picture for user Rich
Submitted by Rich on Fri, 12/29/2017 - 01:16

Here is a project that will challenge your students’ skill in interfacing PocketLab Voyager with Scratch Programming.  The challenge is to program the five bubbles to start bubbling upwards in the teapot—one bubble at 90ᵒC, two at 92ᵒC, three at 94ᵒC, four at 96ᵒC, and five bubbles at 98ᵒC.  When the temperature of the teapot has reached 100ᵒC, the phrase Full Boil should appear.  See the movie accompanying this lesson for clarification of the intended result.  When the burner under the real teapot is turned off and cooling begins, bubbling should go away in revers

A Lesson on Calibration: Interfacing PocketLab Voyager with Modular Robotics Cubelets

Profile picture for user Rich
Submitted by Rich on Tue, 12/26/2017 - 18:40

Sensor-based inquiry is a dominant force in today’s science education, with the calibration of sensors being essential for high-quality measurement.  Wikipedia® defines calibration as “the comparison of measurement values delivered by a device under test with those of a calibration standard of known accuracy.”  In this lesson students will study the process of calibration:

Subject
Grade Level

Interfacing PocketLab Voyager with Modular Robotics Cubelets Maker Space

Profile picture for user Rich
Submitted by Rich on Mon, 12/18/2017 - 20:39

The maker revolution has grown by leaps and bounds during the past four years. With dozens of robotic toys for learning and discovery now in the marketplace, it makes sense to give students opportunities for interfacing these robots with the investigative powers of PocketLab Voyager. This lesson describes an example project by which students interface Voyager with Modular Robotics Cubelets—robot blocks that magnetically connect to form an endless variety of robots. There are seventeen different blocks in three categories—sense, think, and act.

Grade Level

PocketLab Voyager Study of LIDAR Basics

Profile picture for user Rich
Submitted by Rich on Thu, 12/14/2017 - 19:09

LIDAR—an acronym for Light Detection and Ranging—is a method for remote sensing to measure distances.  While LIDAR commonly uses reflected laser light to accomplish this, students can investigate LIDAR principles by using Voyager’s Gyroscope and IR Range Finder in conjunction with the PocketLab-Scratch integration.  PocketLab support has described a project in which Voyager was mounted to an RC BB-8 Star Wars toy to map a two dimensional image of a “room”.  In this lesson, the aut

Subject

Programming Exercise: Voyager Light Sensor Drives a Scratch Program of the Eye

Profile picture for user Rich
Submitted by Rich on Sun, 12/10/2017 - 22:01

The eye is one of the many marvels of the human body.  The colored iris of the eye, surrounding the pupil, acts as a diaphragm to keep the amount of light entering the eye fairly constant.  If you walk out the door of your house to a sunny yard, the iris opening gets smaller letting less light into your eye.  If you enter a dark room after watching your favorite television program, the iris gets larger to allow more light to enter your eye.  This is a protective reflex, as too much light could damage the retina, which is where the image forms in the eye, similar to the film of a traditional

Grade Level

Programming Exercise: Voyager Gyro Controlled Scratch Christmas Tree

Profile picture for user Rich
Submitted by Rich on Thu, 12/07/2017 - 19:27

Here is a fun Holiday project that that will challenge your students’ skills in both the physics of a gyroscope and Scratch computer programming. With reference to Figure 1, all of the sprites shown are either from the sprite library or are created from the Paint new sprite option in Scratch. The challenge is to program the tree’s star to blink on and off by control of the x gyro, blink the blue light by control of the y gyro, and blink the big red light by control of the z gyro. All three lights should be on when the Scratch program starts running.

Subject

A Respiration Study with Voyager and Scratch Programming

Profile picture for user Rich
Submitted by Rich on Wed, 12/06/2017 - 20:13

This lesson is motivated by a respiration study using a FLIR ONE™ thermal camera in conjunction with the Vernier Thermal Analysis Plus app. Using Voyager and the PocketLab Temperature Probe, however, allows students to investigate respiration at a fraction of the cost of a thermal camera. The response time for the Temperature Probe is rapid enough to observe temperature differences in the air inhaled and exhaled through the mouth during the process of respiration.

Grade Level

An Intensive Energy Conservation Experiment Comparing the PocketLab Teacher Geek® Cart with a ZéCar Flywheel Powered Car

Profile picture for user Rich
Submitted by Rich on Thu, 11/09/2017 - 19:21

In addition to being a fascinating toy, the ZéCar flywheel powered car can be utilized in physics curricula to study conservation of energy.  It is available from a variety of sources, including teachersource.com for under $14.  In this lesson students study energy conservation, including gravitational potential energy, translational kinetic energy, rotational kinetic energy, and work done against non-conservative frictional forces, with emphasis on comparing ZéCar with the PocketLab Teacher Geek

Subject
Grade Level